You’ll want to turn these off first thing. [1] X Research source This will protect you from major spills if you should accidentally tear a hose in step 2.
Pull the machine as far out as you can without putting stress on the hoses. Ideally, this will be far enough away from the wall that you can step behind the machine. [2] X Research source If your house is on the newer side, some new water boxes are above the washer so it’s easier to reach the lines without moving the machine.
It’s a good idea to double-check that your valves are still off before doing this. Some styles of faucet handles are easy to accidentally turn back on, and this could have occurred as you moved the machine or when you stepped behind it. [4] X Research source You may find it helpful to wait a few seconds after turning off the valves to try to remove the hoses, as this will allow the pressure in the hoses to abate, making them easier to remove. [5] X Research source Turning on a few other faucets in the house may help them drain more quickly.
You may need to use adjustable pliers or a pipe wrench to loosen the hoses, especially if the machine hasn’t been disconnected in a while. [6] X Research source Once you’ve removed them, drain any remaining water into the bucket.
Point the free end of this hose toward your bucket as well, to allow any water to flow out.
This will protect the plug and prevent the cord from being pulled out accidentally during moving. It’s also a good idea to remove any knobs that can come off the machine, to prevent loss. [9] X Research source
Depending on the model of your machine, this can be achieved with special bolts, a large y-shaped piece of foam, or even simply tightening some screws in the back. [11] X Research source Consult your manual on how best to secure the drum in your machine. You may need to buy a special kit for this.
